C3000AX-Pro is a Wi-Fi 6 (802.11ax) standard wireless access point (AP) released by Linktti. It can reach a rate of up to 2.97Gbps. C3000AX uses Qualcomm IPQ5018, which is a cost-effective and stable Qualcomm Wi-Fi. These strengths make C3000AX-Pro ideal for for general Wi-Fi covering scenarios such as enterprise offices, cafes, hotels, schools, and leisure centers.
Basic Capabilities
Support dual radios
− 2.4GHz (2×2 MU-MIMO and 2 spatial streams) 0.57Gbps+ 5GHz (2×2 MU-MIMO and 2 spatial streams) 2.4Gbps.
− Ports 1x WAN, 2.5Gbps 802.3at. 1x LAN, 1Gbps. DC 12V/2A
Feature Descriptions
Wi-Fi 6 (802.11ax) standards
As the latest generation Wi-Fi standards of IEEE 802.11, 802.11ax improves user experience in high-density access scenarios and supports 2.4 GHz and 5 GHz frequency bands.
MU-MIMO on both the 2.4 GHz and 5 GHz frequency bands, allowing an AP to transmit data to and receive data from multiple STAs simultaneously and multiplying the utilization of radio spectrum resources.
1024QAM modulation, improving data transmission efficiency by 25% compared with 802.11ac (256QAM).
OFDMA scheduling enables multiple users to receive and send information at the same time, reducing latency and improving network efficiency.
Spatial reuse (SR) technology uses basic service set (BSS) coloring to enable APs and STAs to distinguish BSSs, minimizing co-channel interference.
The target wake time (TWT) allows APs and STAs to negotiate the sleep and wake time with each other, thereby improving the battery life of the STAs.
MU-MIMO
MU-MIMO technology enables an AP to send data to multiple STAs simultaneously, which doubles the radio spectrum resource usage, increases the number of access users and bandwidth, and improves user experience in high-density access scenarios.
High-Speed Access
The AP supports 160 MHz frequency bandwidth, which increases the number of available data subcarriers, expands transmission In addition, the AP uses 1024QAM modulation and MU-MIMO to achieve a rate of up to 2.4 Gbps on the 5 GHz band and 2.97Gbps for the device.
High Density Boost Technology
Linktti uses the following technologies to address challenges in high-density scenarios, including access problems, data congestion, and poor roaming experience:
Wired and wireless dual security gurantee
To ensure data security, Linktti APs integrate wired and wireless security measures and provide comprehensive security protection.
- Authentication and encryption for wireless access
The APs support WEP, WPA/WPA2-PSK, WPA3-SAE, WPA/WPA2-PPSK, WPA/WPA2/WPA3, to ensure security of the wireless The authentication mechanism is used to authenticate user identities so that only authorized users can access network resources. The encryption mechanism is used to encrypt data transmitted over wireless links to ensure that the data can only be received and parsed by expected users. - Authentication and encryption for wireless access
The AP access control ensures validity of APs. The CAPWAP link protection, DTLS/IPsec encryption and hardware encryption provide security assurance, improving data transmission security between the AP and the AC.
Automatic radio calibration
Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and generate an AP topology according to the collected data. Based on interference from and loads of authorized APs, rogue APs, and non-Wi-Fi interference sources, each AP automatically adjusts its transmit power and working channel to make the network operate at the optimal performance. In this way, network reliability and user experience are improved.
There are no reviews yet.